Mã G code máy phay CNC Mazak

Mã G code máy phay CNC Mazak

Mã G code máy phay CNC Mazak

Mã G code máy phay CNC Mazak  Mazak G Code List (M Series)

G Code Function
G00 Positioning
G01 Linear interpolation
G01.1 Threading with C-axis interpolation
G02 Circular interpolation (CW)
G03 Circular interpolation (CCW)
G02.1 Spiral interpolation (CW)
G03.1 Spiral interpolation (CCW)
G04 Dwell
G05 High-speed machining mode
G06.1 Fine spline interpolation
G06.2 NURBS interpolation
G07 Virtual-axis interpolation
G07.1 Cylindrical interpolation
G09 Exact-stop check
G10 Data setting mode ON
G10.1 Command address OFF
G11 Data setting mode OFF
G12.1 Polar coordinate interpolation ON
G13.1 Polar coordinate interpolation OFF
G17 X-Y plane selection
G18 Z-X plane selection
G19 Y-Z plane selection
G20 Inch command
G21 Metric command
G22 Pre-move stroke check ON
G23 Pre-move stroke check OFF
G27 Reference point check
G28 Reference point return
G29 Return from reference point
G30 Return to 2nd, 3rd and 4th reference points
G31 Skip function
G31.1 Multi-step skip 1
G31.2 Multi-step skip 2
G31.3 Multi-step skip 3
G33 Thread cutting (straight, taper)
G34 Variable lead thread cutting
G34.1 Hole machining pattern cycle (on a circle)
G35 Hole machining pattern cycle (on a line)
G36 Hole machining pattern cycle (on an arc)
G37.1 Hole machining pattern cycle (on a grid)
—G37 Automatic tool length measurement
—G38 Vector selection for tool radius compensation
G39 Corner arc for tool radius compensation
G40 Nose R/Tool radius compensation OFF
G41 Nose R/Tool radius compensation (left)
G41.2 3-D tool radius compensation (left)
G42 Nose R/Tool radius compensation (right)
G42.2 3-D tool radius compensation (right)
—G43 Tool length offset (+)
G43.4 Tool tip point control (Type 1) ON
G43.5 Tool tip point control (Type 2) ON
—G44 Tool length offset (–)
—G45 Tool position offset, extension
—G46 Tool position offset, reduction
—G47 Tool position offset, double extension
—G48 Tool position offset, double reduction
—G49 Tool position offset OFF
G92 Coordinate system setting/Spindle clamp speed setting
—G50 Scaling OFF
—G51 Scaling ON
—G50.1 Mirror image OFF
—G51.1 Mirror image ON
G50.2 Polygonal machining mode OFF
G51.2 Polygonal machining mode ON
G52 Local coordinate system setting
G53 Machine coordinate system selection
G54 Selection of workpiece coordinate system 1
G55 Selection of workpiece coordinate system 2
G56 Selection of workpiece coordinate system 3
G57 Selection of workpiece coordinate system 4
G58 Selection of workpiece coordinate system 5
G59 Selection of workpiece coordinate system 6
G54.1 Additional workpiece coordinate systems
—G54.2 Selection of fixture offset
G60 One-way positioning
G61 Exact stop mode
G61.1 High-accuracy mode (Geometry compensation)
G62 Automatic corner override
G63 Tapping mode
G64 Cutting mode
G65 User macro single call
G66 User macro modal call A
G66.1 User macro modal call B
G67 User macro modal call OFF
—G68 Programmed coordinate rotation ON
—G69 Programmed coordinate rotation OFF
G68 3-D coordinate conversion ON
G69 3-D coordinate conversion OFF
G270 Finishing cycle
G271 Longitudinal roughing cycle
G272 Transverse roughing cycle
G273 Contour-parallel roughing cycle
G274 Longitudinal cut-off cycle
G275 Transverse cut-off cycle
G276 Compound thread-cutting cycle
G80 Fixed cycle OFF
G283 Front driling cycle
G284 Front tapping cycle
G284.2 Front synchronous tapping cycle
G285 Front boring cycle
G287 Outside driling cycle
G288 Outside tapping cycle
G288.2 Outside synchronous tapping cycle
G289 Outside boring cycle
G290 Fixed cycle A (Longitudinal turning cycle)
G292 Threading cycle
G294 Fixed cycle B (Transverse turning cycle)
—G71.1 Fixed cycle (Chamfering cutter 1, CW)
—G72.1 Fixed cycle (Chamfering cutter 2, CCW)
—G73 Fixed cycle (High-speed deep-hole drilling)
—G74 Fixed cycle (Reverse tapping)
—G75 Fixed cycle (Boring 1)
—G76 Fixed cycle (Boring 2)
—G77 Fixed cycle (Back spot facing)
—G78 Fixed cycle (Boring 3)
—G79 Fixed cycle (Boring 4)
—G81 Fixed cycle (Spot drilling)
—G82 Fixed cycle (Drilling)
—G83 Fixed cycle (Deep-hole drilling)
—G84 Fixed cycle (Tapping)
—G84.2 Fixed cycle (Synchronous tapping)
—G84.3 Fixed cycle (Synchronous reverse tapping)
—G85 Fixed cycle (Reaming)
—G86 Fixed cycle (Boring 5)
—G87 Fixed cycle (Back boring)
—G88 Fixed cycle (Boring 6)
—G89 Fixed cycle (Boring 7)
—G90 Absolute data input
—G91 Incremental data input
—G92.5 Workpiece coordinate system rotation
G93 Inverse time feed
G96 Constant peripheral speed control ON
G97 Constant peripheral speed control OFF
G94 Feed per minute (asynchronous)
G95 Feed per revolution (synchronous)
—G98 Initial point level return in fixed cycles
—G99 R-point level return in fixed cycles
G109 Single program multi-system control
G110 Cross machining control ON
G111 Cross machining control OFF
G112 M, S, T, B output to opposite system
G113 Hob milling mode OFF
G114.3 Hob milling mode ON
G16 Polar coordinate input ON
G15 Polar coordinate input OFF
G10.9 Selection between diameter and radius data input
G130 Tornado cycle
G136 Measurement macro, workpiece/coordinate measurement
G137 Compensation macro

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Call Now Button
Contact Me on Zalo