Máy phay vạn năng MODEL 2500UM

Cung cấp và lắp đặt Máy phay vạn năng MODEL 2500UM

Giới thiệu chung về Máy phay vạn năng MODEL 2500UM

	Rapid traverse on “X”, “Y” & “Z” axis.
	Via inverter variable feeding on “X”, “Y” & “Z” axis.
	High quality meehanite casting body GC-45/DIN-40.
	All gears & shafts are hardened & ground.
	Table swivels ±45° degrees left & right.
	All “X”, “Y” & “Z” wider square slide ways & table
	surface are hardened & ground.
	Motorized ARM/RAM elec. Motor is 3.75KW (5.5HP)
	Horizontal spindle elec. Motor is 5.5KW (7.5HP)
	All square slide way & dovetail way are bigger &
	stronger.
	Cast iron is either ASTM No. 40/meehanite GC-45 or
	DIN GG-40.

Thông số kỹ thuật Máy phay vạn năng MODEL 2500UM

SPECIFICATION:

Technical Specifications	Máy phay vạn năng 2500UM
TABLE Table area Number of “T” shaped slots Distance between “T” shaped slots Rotary movement of table in both direction	1500x350mm (59×13.7″) 5-16H7 60mm 45°
TRAVERSE Automatic Longitudinal Automatic cross Automatic Vertical Available distance from spindle to overarm	1150mm (46″) 400mm (15 3/4″) 500mm (20″) 155mm (6″)
SPINDLE (horizontal) Housing of the taper spindle Diameter of the main Shaft nose Milling arbor diameter (*) Number of speeds of the spindle (R.P.M.)	ISO-40/50 88.88-128.57mm 27mm or (1″) 12(40-1800) 50HZ
FEEDS Longitudinal and cross feeds Vertical feed	10-1208mm (0.4-47″) 5-604mm (0.2-23″)
RAPID TRAVERSE Longitudinal and cross Vertical	1208mm (47″)/min (60HZ) 604mm (23″)/min
PUISSANCE V-Belts Main motor HP Feed motor HP	4 7.5 2.5
COOLING Cooling-pump HP	1/8 (0.10)
MOTORIZED OVERARM Housing of the taper spindle Number of speeds Speed range (R.P.M) Power HP	ISO-40/50 12 (35-1600) 50HZ 5.5
WEIGHT Maximum weight on table Net weight Gross weight with seapacking case Cubical measure of packing	600kg (1320 lb) 3200kg (7040 lb) 3400kg (7480 lb) 184x227x227cm (70x89x88″)

Phụ kiện tiêu chuẩn theo máy

27mm or 1″ long horizontal ISO#40 milling arbor.
Horizontal & vertical manual draw-bars.
Coolant pump & coolant system.
Tool box and services tools.

Phụ kiện lựa chọn thêm

AC auto for over – arm moving device is available.
Ball screws for “X”, “Y” axis.
Auto ways lubrication unit.
Chip tray.
Universal dividing head, complete with 3 JAW chuck.
Horizontal & vertical rotary table.
Hydraulic clamping vise 6″ or 8″.
Power milling vise 6″ or 8″.
Clamping kit.
Pneumatic power draw bar.
ISO#50 spindle taper.