Máy cuộn dây thép tự động liên tục

Giới thiệu chung

CONTINUOUS WIRE DRAWING MACHINE

Model：	*YTD-600SG5/(N)+ABCD-600G or ABCD-600B**
	*YTD-600SG3/(N)+ASD-600B**
	*YTD-400SG2/(N)+ABCD-400B** or ASD-400B

The Continuous Wire Drawing Machine is a multi drum, multi-die wire drawing machine which is equipped with drawing and colling function. The drum is casted with friction resistant material. The surface is ground by spot welding and internal side treated by compulsory water cooling device. The die box is equipped with pressure die for better lubrication and equipped with water cooling device. The gears in the high speed operation with lower noise and high efficiency. The drum speed is controlled by inverter for carrying out non-section speed shift and thus, applicable for drawing steel wires, stainless steel wires, and aluminum-copper wires, etc.

Model：YTD-600/460G5+ASD-600B

This type of machine has two layer capstans. It can draw different kinds of finished wire diameter.
It draws bigger diameter to smaller one (such as

5.5~

1.6).Suitable for low. Medium carbon
steel wire and other metal products drawing processes.

Thông số kỹ thuật Máy cuộn dây thép tự động liên tục

Model	*YTD-600SG5/(N)+ABCD-600G or +ABCD-600B**		*YTD-600SG5/(N)+ABCD-600G or +ABCD-600B**
Drawing material	Low, or medium carbon steel
Drawing capstan die	600 MM		600 MM
Wire inlet dia.	Mild 8.0~6.5	Hard 6.5~5.5	Mild 6.5~5.5	Hard 6.5~5.5
Wire final dia.	2.4~2.0 mm	2.3~1.8 mm	1.8~1.5 mm	2.3~1.8 mm
Drawing speed (M/Min)	530~700	530~700	535~800	535~800
Power required / Block	50HP	50HP	40HP	40HP

Model	*YTD-600SG3/(N)+ASD-600B**		*YTD-600SG3/(N)+ASD-600B**
Drawing material	Low carbon steel		Stainless steel
Drawing capstan die	600 MM		600 MM
Wire inlet dia.	Mild 6.5~5.5	Hard 6.5~5.5	6.5~5.5mm
Wire final dia.	2.0~1.65 mm	2.0~1.65 mm	2.3~2.0 mm
Drawing speed (M/Min)	400~600	535~800	200~300
Power required / Block	30HP	40HP	25HP~30HP

Model	*YTD-400SG2/(N)+ABCD-400B**		*YTD-400SG2/(N)+ASD-400B**
Drawing material	Low, medium or hight carbon steel		Stainless steel
Drawing capstan die	400 MM		400 MM
Wire inlet dia.	Mild 3.5~3.2	Hard 3.0~2.7	2.7~2.0mm
Wire final dia.	1.1~1.0 mm	0.9~0.8 mm	1.0~0.7 mm
Drawing speed (M/Min)	600~800	600~800	Max.800
Power required / Block	25HP~30HP	25HP~30HP	25HP~20HP

MODEL	YTD-600/4605G+ASD-600B
Inlet wire dia.	6.5 – 5.5 (m/m)
Finished wire dia.	2.0 – 1.6 (m/m)
Diameter of drum (standard) m/m	Upper 600	Lower 460
Drawing speed	500-600 M/Min
Horse power	40-50 HP