Lỗi máy CNC Okuma

Lỗi máy CNC Okuma Alarm P List

Lỗi máy CNC Okuma

Lỗi máy CNC Okuma Alarm P List

Sau đây là liệt kê danh sách Lỗi máy CNC Okuma Alarm P List

  • 0700 NC start-up error
  • 0701 P100-Menu initialization failure
  • 0702 Power failure upon start-up
  • 0703 Load information file not found
  • 0704 File load error
  • 0705 Default scheduling table error
  • 0706 Backup data file error
  • 0707 DTL link/unlink error
  • 0708 RT thread stack overflow
  • 0709 Hardware exception
  • 0710 System call error
  • 0711 AlarmService library error
  • 0712 AlarmService internal error (exception)
  • 0713 AlarmService error
  • 0714 Blue screen
  • 0715 P100-Menu error
  • 0716 Floating point exception
  • 0717 PLC control error
  • 0718 Real time thread time over
  • 0719 HXCP thread error
  • 0720 AlarmService internal error
  • 0721 DeviceNet error
  • 0723 DeviceNet I/O data link file read
  • 0725 M code data file
  • 0726 Safety speed data error
  • 0727 MCS firmware doesn’t support POS2 unit
  • 0728 FL-net error
  • 0729 Non-responsive software detected.
  • 0731 R Spec. error
  • 0732 Unable to execute lost motion compensation
  • 0735 MCS DD encoder link error
  • 0736 MCS DD encoder error
  • 0737 MCS DD encoder (slave sensor) detected error
  • 0738 MCS DD encoder initialization failure
  • 0739 MCS DD encoder (slave sensor) initialization failure
  • 0741 MCS firmware version error
  • 0742 Relocation detection error
  • 0744 MCS power supply unit overload
  • 0750 The spec.-code or select-soft. was wrong
  • 0752 VDU communication error
  • 0753 VDU detected error
  • 0754 VDU initialization failure
  • 0755 SIO link error
  • 0756 PSC optical scale encoder error
  • 0757 MF-SAFETY Error
  • 0758 Safety I/O Error
  • 0759 Safety Servo Link Error
  • 0782 Magnetic encoder speed detection error
  • 0783 MCS Rotary encoder 5 initialization failure
  • 0784 MCS Rotary encoder 5 error
  • 0785 MCS Rotary encoder 4 initialization failure
  • 0786 MCS Rotary encoder 4 error
  • 0787 MCS Rotary encoder 3 initialization failure
  • 0788 MCS Rotary encoder 3 error
  • 0789 MCS Rotary encoder 2 error
  • 0790 MCS Rotary encoder 1 initialization failure
  • 0791 MCS Rotary encoder 1 error
  • 0792 MCS Linear scale 4 initialization failure
  • 0793 MCS Linear scale 4 error
  • 0794 MCS Linear scale 3 initialization failure
  • 0795 MCS Linear scale 3 error
  • 0796 MCS Linear scale 2 initialization failure
  • 0797 MCS Linear scale 2 error
  • 0798 MCS Linear scale 1 initialization failure
  • 0799 MCS Linear scale 1 error
  • 0800 Spindle D/A control data file read
  • 0801 TCP/IP board detected error
  • 0802 Load information file not found
  • 0803 File load error
  • 0804 MSB file mismatch
  • 0805 MOP-Tool parameter PBU load
  • 0806 MOP-Tool tool data PBU load
  • 0807 ACP panel status receipt error
  • 0808 Speed change ratio failure
  • 0810 NC I/O data file read
  • 0812 MCS initialization error
  • 0813 MCS Communication error
  • 0814 MCS data file corrupt
  • 0815 PLC real-time task loop error
  • 0816 PLC initialization error
  • 0817 MCS error
  • 0818 ADP initialization failure
  • 0820 Machine data file read
  • 0821 Spindle gear ratio
  • 0822 Wheel data file read
  • 0823 AXIS CONSTRUCTION DATA setting error
  • 0824 Unit connection mistake
  • 0825 AXIS CONSTRUCTION name not set
  • 0826 AXIS CONSTRUCTION DATA file read
  • 0827 Control axis not found
  • 0828 Wire feed axis No. error
  • 0833 MCS option program file not sent
  • 0834 MCS servo data error
  • 0835 MCS communication error
  • 0836 Program request illegal
  • 0837 Loader spec. code data error
  • 0838 Loader backup data file read error
  • 0839 Specification conditions failure
  • 0840 SuperHi-NC specification mismatch
  • 0841 FCP4 board detected error
  • 0842 Safety monitor spec. error
  • 0845 Specification code setting failure
  • 0846 Thermal deviation comp. backup data file read
  • 0847 DNC-DT preload task start error
  • 0848 PSCB error
  • 0849 Synchronous axis tandem control initialization failure
  • 0850 MCS Undefined alarm number
  • 0851 MCS Inverter unit fault
  • 0852 Mistake in data from MCS to NC
  • 0853 MCS CON APA deviation
  • 0854 MCS Power supply unit error
  • 0855 MCS Converter link error
  • 0856 MCS DC-bus voltage alarm
  • 0857 MCS Motor overcurrent
  • 0858 MCS Power unit overheat
  • 0859 MCS Power unit overload
  • 0860 MCS Supply voltage flutter
  • 0861 MCS Inverter capacity differs from spec.
  • 0862 MCS Winding change failure
  • 0863 MCS Encoder link error
  • 0864 MCS Encoder detected error
  • 0865 MCS Encoder initialization failure
  • 0866 MCS Encoder with shaft detected error
  • 0867 MCS Encoder with shaft initialization failure
  • 0868 MCS ABSO SCALE error
  • 0869 MCS ABSO SCALE initialization failure
  • 0870 MCS Magnetic encoder alarm
  • 0871 MCS Resolver alarm
  • 0872 MCS Pulse generator count over
  • 0873 MCS Motor overheat
  • 0874 MCS Servo link error
  • 0875 MCS Servo link disconnection
  • 0876 Mistake in data from NC to MCS
  • 0877 MCS Servo data error
  • 0878 MCS Illegal command
  • 0879 MCS CON speed over
  • 0880 MCS Speed command over
  • 0881 MCS DIFF over
  • 0882 MCS APA speed over
  • 0883 MCS Full-closed APA error
  • 0884 MCS Over speed
  • 0885 MCS Speed deviation over
  • 0886 MCS Collision detected
  • 0887 MCS Urgent-stop time over
  • 0888 MCS Belt is broken
  • 0889 MCS Axis change control error
  • 0890 MCS Independent encoder initialization failure
  • 0891 MCS Calculated current position lies outside range
  • 0892 MCS Motor overload
  • 0893 MCS Safety speed monitor E-Link error
  • 0894 MCS ABSO SCALE sub-slider detected error
  • 0895 MCS Tandem control communication error
  • 0896 MCS Full abso scale link error
  • 0897 MCS Full abso scale error
  • 0898 MCS Full abso scale initialization failure
  • 0899 MCS Axis stop signal error
  • 0940 Time sharing task control
  • 0941 Real-time task control
  • 0942 Real-time task loop error
  • 0943 Main processor name incorrect
  • 0944 Slave processor name incorrect
  • 0945 Memory board/battery life
  • 0951 SMP error
  • 0952 Not equipped with processor board
  • 0954 Peripheral processor start
  • 0955 Spec. code: data file
  • 0956 Backup data file read
  • 0957 Graphic backup data file read
  • 0958 Pitch compensation data file read
  • 0965 Configuration file format error
  • 0971 Cache data: Initialization error
  • 0988 Cache data: Operation error
  • 0989 CPU information table data incorrect
  • 0990 TASK generate error
  • 0991 TASK information table data incorrect
  • 0992 PLC backup data file read
  • 0993 TCP/IP board illegal
  • 0994 TCP/IP configuration file
  • 0995 Machine axis data file
  • 0996 PLC axis data file
  • 0997 PLC monitor backup data file read
  • 0998 PLC sequence program load
  • 0999 Synchronous tap data file read

Lỗi máy CNC Okuma Alarm A List

Below are  listed Okuma A type alarms for Okuma OSP-P300S/P300L CNC systems.

  • 1071 Memory board battery depleted. Replace quickly!
  • 1089 PLC alarm No. illegal
  • 1091 PLC alarm message file not found
  • 1092 PLC backup data file write
  • 1093 PLC backup data file not found
  • 1094 PLC back up data file read
  • 1097 Safety speed monitor error
  • 1098 MCS not responsive
  • 1100 Parameters not set
  • 1101 Blue screen
  • 1102 P100-Menu error
  • 1103 AlarmService internal error
  • 1104 DeviceNet slave idle mode
  • 1105 DTL error
  • 1106 FL-net initialization error
  • 1107 Major FL-net error
  • 1108 Non-responsive software detected
  • 1109 Error occurred during CAS
  • 1110 PLC control error
  • 1111 Shutting down to avoid damage
  • 1112 Non-functioning device detected
  • 1113 MCS Parameter learning error
  • 1114 MCS Inertia identification error
  • 1120 Overload detected.
  • 1121 PSC Optical scale encoder error
  • 1122 Safety controller error
  • 1123 Safety speed monitor error
  • 1132 VDU communication error
  • 1133 VDU detected error
  • 1134 VDU initialization failure
  • 1135 MCS DD encoder link error
  • 1136 MCS DD encoder error
  • 1137 MCS DD Encoder (slave sensor) error
  • 1138 MCS DD encoder initialization failure
  • 1139 MCS DD encoder (slave sensor) initialization failure
  • 1144 MCS Power supply unit overload
  • 1146 Tailstock torque over
  • 1150 MCS Undefined alarm number
  • 1151 MCS Inverter unit fault
  • 1152 Mistake in data from MCS to NC
  • 1153 MCS CON APA deviation
  • 1154 MCS Power supply unit error
  • 1155 MCS Converter link error
  • 1156 MCS DC-bus voltage alarm
  • 1157 MCS Motor overcurrent
  • 1158 MCS Power unit overheat
  • 1159 MCS Power unit overload
  • 1160 MCS Supply voltage flutter
  • 1161 MCS Inverter capacity differs from spec.
  • 1162 MCS Winding change failure
  • 1163 MCS Encoder link error
  • 1164 MCS Encoder detected error
  • 1165 MCS Encoder initialization failure
  • 1166 MCS Encoder with shaft detected error
  • 1167 MCS Encoder with shaft initialization failure
  • 1168 MCS ABSO SCALE error
  • 1169 MCS ABSO SCALE initialization failure
  • 1170 MCS Magnetic encoder alarm
  • 1171 MCS Resolver alarm
  • 1172 MCS Pulse generator count over
  • 1173 MCS Motor overheat
  • 1174 MCS Servo link error
  • 1175 MCS Servo link disconnection
  • 1176 Mistake in data from NC to MCS
  • 1177 MCS Servo data error
  • 1178 MCS Illegal command
  • 1179 MCS CON speed over
  • 1180 MCS Speed command over
  • 1181 MCS DIFF over
  • 1182 MCS APA speed over
  • 1183 MCS Full-closed APA error
  • 1184 MCS Over speed
  • 1185 MCS Speed deviation over
  • 1186 MCS Collision detected
  • 1187 MCS Urgent-stop time over
  • 1188 MCS Belt is broken
  • 1189 MCS Axis change control error
  • 1190 MCS Independent encoder initialization failure
  • 1191 MCS Calculated current position lies outside range
  • 1192 MCS Motor overload
  • 1194 MCS ABSO SCALE sub-slider error
  • 1195 MCS Tandem control communication error
  • 1196 MCS Full abso scale link error
  • 1197 MCS Full abso scale error
  • 1198 MCS Full abso scale initialization failure
  • 1199 MCS Axis stop signal error
  • 1200 Stroke end over
  • 1202 Plus variable limit over
  • 1203 Minus variable limit over
  • 1213 User reserve code
  • 1215 S.M command asynchronous
  • 1216 Synchronous P code error
  • 1217 Torque limiter
  • 1218 Torque limiter cancel
  • 1219 Torque limit over
  • 1220 Torque skip condition not satisfied
  • 1221 Duplicate M-code
  • 1222 Interrupt return pointer mismatch
  • 1223 Thread feed command error
  • 1225 Contour generation calculation error
  • 1228 Illegal spindle mode
  • 1229 Max. spindle rotation count not specified
  • 1238 Spindle moved to interference distance
  • 1243 Turret rotation conditions
  • 1245 Axis moved to tool interference area
  • 1257 Axis moved to chuck barrier area
  • 1258 Axis moved to tailstock barrier area
  • 1259 Tow-along tailstock connecting
  • 1260 Tow-along tailstock command not possible
  • 1262 W-axis plus variable limit over
  • 1263 W-axis minus variable limit over
  • 1265 Parts catcher interlock
  • 1272 Load exceeds No.2 limit value
  • 1273 Load monitor command already executed
  • 1278 Laser measurement data NG
  • 1279 IND. CMP. data verification failure
  • 1280 HP9825A unable to receive
  • 1281 Abnormal data from HP9825A
  • 1282 Data error from HP9825A
  • 1283 C-axis command not possible
  • 1299 Axis moved to sub-spindle interference distance
  • 1300 W-axis unable to move
  • 1303 Pickoff index position
  • 1306 Sensor touch G00
  • 1307 No contact with sensor
  • 1309 Sensor protect
  • 1316 ATC manual operation mode impossible
  • 1322 Y-axis parameter illegal
  • 1323 Illegal YS-axis position
  • 1328 Adaptive control communication error
  • 1329 Shift amount error
  • 1332 Spindle belt slip
  • 1334 APA error
  • 1336 Moved inside horizontal barrier area
  • 1338 LOAD MONITOR W overload
  • 1339 Spindle different from position when door open
  • 1345 Unable to move to tool change position
  • 1347 STM time over
  • 1348 Cycle time over
  • 1349 Contour generation impossible
  • 1353 Measurement system error
  • 1355 Tow-along steady rest connected
  • 1356 Steady rest torque over
  • 1357 Positioning uncertain
  • 1367 NC tailstock position error
  • 1376 Cutting error
  • 1393 Tow-along steady rest interference position
  • 1412 HOME POSITION movement interlock
  • 1426 Moved inside barrier area
  • 1431 Safety speed over
  • 1432 Safety monitor error detection
  • 1435 Turret interference
  • 1436 Power ON APA deviation
  • 1440 Steady rest-Tailstock interlock
  • 1441 Safety speed clamp
  • 1453 Heavy work data not found
  • 1460 TEMP RISE LIMIT OVER
  • 1463 Spindle moved inside transportation barrier
  • 1465 Spindle low acceleration mode condition
  • 1466 HOB cutting overload
  • 1467 Position scale error XS-axis
  • 1468 Servo amp error XS-axis
  • 1469 APA speed XS-axis
  • 1470 APA range XS-axis
  • 1471 CON speed XS-axis
  • 1472 Stroke end over XS-axis
  • 1473 Actual position initialization error XS-axis
  • 1474 Learning control error XS AXIS
  • 1475 CAM execution data not selected XS-axis
  • 1476 Learning control command XS-axis
  • 1477 Syncronous mode command
  • 1478 Chuck coordinates mismatch
  • 1479 PSCB command error
  • 1480 DIFF over XS-axis
  • 1481 Drift compensation value over
  • 1482 PSCB Real-time task error
  • 1483 PSCB INT task loop error
  • 1484 PSCB EC task loop error
  • 1485 PSCB Time sharing task error
  • 1486 PSCB Exception error
  • 1487 PSCB Memory test error
  • 1488 PSCB Overheat
  • 1489 First time drift compensation value over
  • 1490 Synchronous mode spindle speed command
  • 1491 Heavy tooling data not found
  • 1492 PSCB P.G. underpulse
  • 1493 PSCB P.G. overpulse
  • 1494 PSCB Minus stroke end over
  • 1500 Workpiece rest interlock
  • 1501 Workpiece rest torque over
  • 1504 Alarm-A at other system
  • 1507 Unable to enter C-axis sync. Mode
  • 1509 A turret and B turret interference
  • 1510 Unable to execute Hi-CUT Pro control
  • 1511 SPM contour control not possible
  • 1512 SPM contour control error
  • 1513 Unable to clamp workpiece
  • 1514 Clutch A slip over limit
  • 1515 Mistake in X, Z commands
  • 1516 NC tailstock slide resistance over
  • 1517 Turret or tool not at index cut position
  • 1519 Spindle phase over limit
  • 1520 Synchronous error limit over
  • 1521 NC tailstock error
  • 1522 Linear guide cover interference area
  • 1523 Workpiece weight data file not found
  • 1524 Feed speed over
  • 1525 M-tool spindle speed over in Hob mode
  • 1526 Turret index error position
  • 1527 Unable to execute while mounting LBB
  • 1528 The attachment status mismatch
  • 1529 M axis belt slip
  • 1530 Steady-rests interference position
  • 1531 Tool posture fluctuation reduction error
  • 1532 Turret interference distance intrusion
  • 1682 Magnetic encoder speed detection error
  • 1683 MCS Rotary encoder 5 initialization failure
  • 1684 MCS Rotary encoder 5 error
  • 1685 MCS Rotary encoder 4 initialization failure
  • 1686 MCS Rotary encoder 4 error
  • 1687 MCS Rotary encoder 3 initialization failure
  • 1688 MCS Rotary encoder 3 error
  • 1689 MCS Rotary encoder 2 error
  • 1690 MCS Rotary encoder 1 initialization failure
  • 1691 MCS Rotary encoder 1 error
  • 1692 MCS Linear scale 4 initialization failure
  • 1693 MCS Linear scale 4 error
  • 1694 MCS Linear scale 3 initialization failure
  • 1695 MCS Linear scale 3 error
  • 1696 MCS Linear scale 2 initialization failure
  • 1697 MCS Linear scale 2 error
  • 1698 MCS Linear scale 1 initialization failure
  • 1699 MCS Linear scale 1 error
  • 1700 Emergency stop
  • 1701 EC overload
  • 1702 BDU overload
  • 1703 EC circuit breaker
  • 1704 Transformer overheat
  • 1705 Oil pressure low
  • 1706 Alarm detected from externally connected device
  • 1707 Stroke end over
  • 1708 Canceling stroke end limit
  • 1709 XA-axis overload
  • 1710 XB-axis overload
  • 1711 ZA-axis overload
  • 1712 ZB-axis overload
  • 1713 Spindle rotation interlock
  • 1714 S.M command asynchronous
  • 1715 Spindle revolution over
  • 1716 M03/M04 change command failure
  • 1717 Unable to use M40, M43, M44 commands
  • 1718 Tow-along tailstock command error
  • 1719 Gear command/position mismatch
  • 1720 Gear command error
  • 1721 Gear neutral
  • 1722 M19 command issued when gear neutral
  • 1723 Z-axis moved to spindle interference distance
  • 1724 Spindle synchronization interlock
  • 1725 Impossible command issued during spindle synchronization
  • 1726 C-axis command not possible
  • 1727 C-axis ON/OFF command not possible
  • 1728 C-axis clamp/unclamp command not possible
  • 1729 Unable to confirm C-axis advance
  • 1730 Turret clamp/position check error
  • 1731 Turret index control alarm
  • 1732 Turret rotation interlock
  • 1733 Tool number input error
  • 1734 Pickoff chuck interlock
  • 1735 Sub-spindle chuck pressure insufficient
  • 1736 Pickoff index interlock
  • 1737 Turret unclamp interlock
  • 1738 Turret rotation impossible
  • 1739 Chuck clamp pressure insufficient
  • 1740 Chuck open/close interlock
  • 1741 Chuck unclamp
  • 1742 Chuck interlock cancel interlock
  • 1743 Index chuck interlock
  • 1744 Air chuck pressure error
  • 1745 Chucking miss
  • 1746 Chuck missclamp
  • 1747 No tailstock quill advance answer
  • 1748 Tailstock quill advance over
  • 1749 Tailstock quill command error
  • 1750 Tailstock interference
  • 1751 Tow-along tailstock ON/OFF interlock
  • 1752 Tow-along tailstock clamp/unclamp error
  • 1753 Parts catcher interlock
  • 1754 Coupling device alarm
  • 1755 Robot inside machine
  • 1756 Loader inside machine
  • 1757 Loader interlock
  • 1758 Loader not at escape position
  • 1759 Loader/robot not at escape position
  • 1760 Revolution tool M13/M14 change not possible
  • 1761 Revolution tool gear mismatch
  • 1762 Revolution tool gear interlock
  • 1763 Tool revolution interlock
  • 1764 Tool rotating when T command issued
  • 1765 Rotation tool index interlock
  • 1766 Rotation tool over speed
  • 1767 M-axis clutch connection error
  • 1768 Sub-spindle rotation over
  • 1769 Sub-spindle index interlock
  • 1770 Door interlock
  • 1771 Door open/close limit switch NG
  • 1772 Door open/close condition
  • 1773 Unable to restore axis position when door closed
  • 1774 Sensor head advance/retract interlock
  • 1775 Touch setter limit
  • 1776 Sensor head not at retract position
  • 1777 ATC change arm position error
  • 1778 No dummy tool in ATC turret
  • 1779 Manual tool change operation interlock
  • 1780 ATC system mode interlock
  • 1781 Loader/robot interference
  • 1782 Power sequence error
  • 1783 Turret unclamp time over
  • 1784 Turret clamp time over
  • 1785 NC parameter data transfer error
  • 1786 Coolant error
  • 1787 Door open/close check NG
  • 1788 Safety door open
  • 1789 Steady rest interlock
  • 1790 Bar feeder not ready
  • 1791 Bar feeder advance/retract interlock
  • 1792 Turret rotation interlock
  • 1793 Side cover interlock
  • 1794 Rear cover interlock
  • 1795 Side cover open/close lmt switch NG
  • 1796 Turret index clutch disconnect error
  • 1797 Invalid mode switch
  • 1798 Steady rest missclamp
  • 1799 Sensor protection cover interlock
  • 1800 Locking switch NG
  • 1801 Bar feeder setting position mismatch
  • 1802 Safety guard interlock
  • 1803 Machine enabling button error
  • 1804 Safety speed monitor output error
  • 1805 Teaching panel enabling switch error
  • 1806 ATC Logic data file error
  • 1807 Shutter close not possible
  • 1808 Safety fence locking switch NG
  • 1809 Manual command time over
  • 1810 Safety guard interlock
  • 1811 Loader axis unable to move
  • 1812 Mist lubrication unit error
  • 1813 2nd spindle condition satisfy
  • 1814 W-axis movement interlock
  • 1815 Face driver pressure insufficient
  • 1816 Safety fence open
  • 1817 Setup switch ON
  • 1818 Hand slide interlock
  • 1819 Hand turning interlock
  • 1820 Turnover interlock
  • 1821 Magazine door lock error
  • 1822 Slide step interlock
  • 1823 Vibration cutter faulty
  • 1824 Oil cooler error
  • 1825 Spindle cooling unit error
  • 1826 Oil air lubrication illegal
  • 1827 Setup switch ON
  • 1828 Laser sensor interlock
  • 1829 Sp. oil air lub. air pressure error
  • 1830 SP. oil air lub. oil level error
  • 1831 Sp. oil air lub. oil pressure error
  • 1832 Unloader advance/retract interlock
  • 1833 Tow-along steady rest unclamp interlock
  • 1834 Door interlock
  • 1835 Workpiece receiver interlock
  • 1836 Interference area intrusion
  • 1837 Worktable overload
  • 1838 Workpiece stabilizer interlock
  • 1839 Deburring tool interlock
  • 1840 M code data file mismatch
  • 1841 Swing interlock
  • 1842 Wrist rotation interlock
  • 1843 Workpiece rest interlock
  • 1844 Workpiece pusher interlock
  • 1845 Hand rotation interlock
  • 1846 Chuck grip confirmation unit faulty
  • 1847 Tailstock air miss detection input NG
  • 1848 Chuck grip failure
  • 1849 Workpiece unloading unit interlock
  • 1850 Robot/Loader emergency stop
  • 1851 Air pressure insufficient
  • 1852 NC alarm
  • 1853 Oil pressure insufficient
  • 1854 Error detected from externally connected device
  • 1855 M code time over
  • 1856 Circuit breaker tripped
  • 1857 Intrusion interlock
  • 1858 No hand open/close output
  • 1859 Swing position no output
  • 1860 Axis interlock
  • 1861 Stroke end over
  • 1862 Canceling stroke end limit
  • 1863 Loader interference
  • 1864 Z/C-axis not in rotation possible area
  • 1865 Swing position indefinite
  • 1866 No workpiece clamped on hand A
  • 1867 No workpiece clamped on hand B
  • 1868 Wrist broken
  • 1869 Hand open/ close interlock
  • 1870 Hand clamp confirmation
  • 1871 Coupling device error
  • 1872 Safety fence interlock
  • 1873 Door interlock
  • 1874 Interlock release NG
  • 1875 Safety fence lock NG
  • 1876 Swing interlock
  • 1877 Robot/Loader power sequence error
  • 1878 Machine start impossible
  • 1879 Workpiece puller holder interlock
  • 1880 Loader hand/machine interference
  • 1881 Part turnover device R clamp empty
  • 1882 Part turnover device L clamp empty
  • 1883 Part turnover device R advanced too far
  • 1884 Part turnover device L advanced too far
  • 1885 Loader/part turnover device interference
  • 1886 Wrist turning position indefinite
  • 1887 Workpiece puller interlock
  • 1888 Backup roller interlock
  • 1889 Auto workpiece I/O unit FWD pressure low
  • 1890 Coolant flow insufficient
  • 1891 Unloader interference position
  • 1892 Unloader interlock
  • 1893 Running mode error
  • 1894 Running mode error
  • 1895 Fire alarm
  • 1896 Air source pressure low
  • 1897 Lower turret drive belt torn
  • 1898 OP panel within interference range
  • 1899 Safety fence open
  • 1900 Plus variable limit over
  • 1901 Minus variable limit over
  • 1920 User reserve code
  • 1922 Torque limit over
  • 1924 Barrier intrusion
  • 1927 M code time over
  • 1928 Cycle time over
  • 1938 Machine start impossible
  • 1939 Hand open/close interlock
  • 1940 Loader Z-axis stopper set
  • 1941 Safety guard interlock
  • 1942 Safety speed over
  • 1943 Safety speed monitor error
  • 1944 Safety monitor error detection
  • 1945 Running mode error
  • 1949 Alarm-A at other system
  • 1950 Safety speed monitor error
  • 1951 Safety controller error
  • 8500 Cut off error
  • 8501 ATC shutter not close
  • 8502 Unable to G21
  • 8503 Spindle internal centering unit interlock
  • 8504 Tool change command
  • 8505 Tow-along steady rest clamp/unclamp
  • 8506 Combination chuck interlock
  • 8507 Automatic lubrication system error
  • 8508 Coolant filter
  • 8509 Cutting feed interlock
  • 8510 Oil unit error
  • 8511 B-axis clamp/unclamp interlock
  • 8512 Turret position uncertain
  • 8513 Coolant interlock
  • 8514 Work conveyor interlock
  • 8515 Work ejector interlock
  • 8516 Touch setter unlock time over
  • 8517 Work hand interlock
  • 8518 Bar Feeder illegal
  • 8520 Stopper interlock
  • 8521 Work measurement operation
  • 8522 Locater oil pressure
  • 8523 Locater condition
  • 8524 Oil motor overload
  • 8525 Coolant motor overload
  • 8526 Spindle cooling motor overload
  • 8527 Oil skimmer overload
  • 8528 Magnet separator overload
  • 8529 Tool monitoring unit error detection
  • 8530 Laser sensor input data error
  • 8531 Door open
  • 8532 Polish Material unit interlock
  • 8536 Operation ready OFF condition
  • 8537 Magazine door Interlock
  • 8538 ATC shutter barrier area
  • 8539 Complete stop
  • 8540 X-axis in interference range
  • 8541 Spindle phase synchronization interlock
  • 8542 Synchronizing spindle phase
  • 8543 Measurement Unit error
  • 8545 Illegal robot/loader request
  • 8546 Rolling-head movement error
  • 8547 Drive jig unit interlock
  • 8548 ACC interlock
  • 8549 ACC door interlock
  • 8550 ACC manual operation mode impossible
  • 8551 Semi-dry unit error
  • 8552 Sub-chuck interlock
  • 8553 ACC airblow interlock
  • 8554 Spindle table rotation
  • 8555 B-Axis movement
  • 8556 No mount magazine
  • 8557 Tool Breakage sensor error
  • 8558 L-tool index command
  • 8559 Part turn device advanced too far
  • 8560 Override switch failure
  • 8561 Grinding whl spindle motor overload
  • 8562 Whl spdl coolant pressure drop/loss
  • 8563 Inverter failure
  • 8564 Turret drive belt disconnection
  • 8566 Tool clamp interlock
  • 8567 Spindle cover open/close limit SW NG
  • 8568 Insulation error
  • 8569 Magazine turn interlock
  • 8570 Magazine tool No.
  • 8571 Irregular coolant level
  • 8572 ATC step time over
  • 8573 Spingdle vibration
  • 8574 MCS operation ready off
  • 8575 Grinding whl spindle unit
  • 8576 Grinding whl spindle unit interlock
  • 8577 Axis interlock
  • 8578 Coupling device interlock
  • 8579 Tailstock and turret interference
  • 8580 Canceling interference detection
  • 8581 Loader automatic operation
  • 8582 Illegal workpiece pusher confirmation
  • 8583 ATC change arm overload
  • 8584 Tailstock high/low change interlock
  • 8585 Coiling prevention equip. interlock
  • 8586 Air picker broken
  • 8587 AREA SENSOR interlock
  • 8588 Coolant Flow
  • 8589 Chip conveyor faulty
  • 8590 Tailstock pedestal condition
  • 8591 C-axis synchronous condition
  • 8592 Synchronizing C-axis
  • 8593 Chip crusher error
  • 8594 Sensor overstroke
  • 8595 Linear guide cover interference
  • 8596 Safety plug interlock
  • 8597 Shuttle device hand clamp empty
  • 8598 Ceiling door interlock
  • 8599 Illegal tool clamp unit
  • 8600 Ceiling door open/close limit SW NG
  • 8601 ATC tool change arm inverter failure
  • 8602 Chip pan cover interlock
  • 8603 C-axis clamp/unclamp condition
  • 8604 Long tool change protection
  • 8605 Drive belt disconnection
  • 8606 APC door open/close limit NG
  • 8607 XB cover interference
  • 8608 Illegal touch setter unit
  • 8609 Axis overheat
  • 8610 Invalid spindle winding condition
  • 8611 Winding change error
  • 8612 APC interlock
  • 8613 APC clamp/unclamp time over
  • 8614 APC escape position
  • 8615 ATC shutter not open
  • 8616 Coolant level low
  • 8617 Thru-the-tool coolant filter clogged
  • 8618 M spindle overload
  • 8619 Machine axis travel limit over
  • 8620 PLC system data
  • 8621 M spindle air curtain pressure low
  • 8622 Hydraulic unit oil level low
  • 8623 Mist air lubrication unit
  • 8624 Axis interlock
  • 8625 Tool revolution command
  • 8626 Ceiling door guide interlock
  • 8627 Long boring bar change protection
  • 8628 Spindlehead lib oil level low
  • 8629 Spindlehead lubricant pressure low
  • 8630 Hydraulic pressure drop
  • 8631 Invalid safety-monitor spec.
  • 8632 UNUSABLE interrupt program
  • 8633 AAC Operation mode impossible
  • 8634 ATC shutter open/close condition
  • 8635 Spindle actual position detection error
  • 8636 RSS unit Battery error
  • 8637 RSS unit Communication error
  • 8638 Sub-spindle head clamp condition
  • 8639 Tailstock control mode ON/OFF cond.
  • 8640 Center partition interlock
  • 8643 Unusable PLC spec. code
  • 8644 Fire extinguish unit power OFF
  • 8645 Fire extinguish unit error
  • 8646 Fire ext. unit power OFF or error
  • 8647 Hand open/close switch NG
  • 8648 Tailstock tool mode mismatch
  • 8649 Measurement sensor unit interlock
  • 8680 Area sensor interlock

Lỗi máy CNC Okuma Alarm B List

Sau đây là liệt kê danh sách Lỗi máy CNC Okuma Alarm B List  for Okuma OSP-P300S/P300L CNC systems.

  • 2049 PLC axis stroke end over
  • 2050 PLC axis command
  • 2051 PLC axis continuous positioning over
  • 2052 Blue screen
  • 2053 P100-Menu error
  • 2058 Error occurred while CAS work
  • 2059 Non-functioning device detected
  • 2060 Fan motor error on panel computer unit
  • 2090 The remaining time after relocation has passed
  • 2092 MCS Parameter learning error
  • 2114 MCS Inertia identification error
  • 2120 Overload detected.
  • 2132 VDU communication error
  • 2133 VDU detected error
  • 2134 VDU initialization failure
  • 2135 MCS DD encoder link error
  • 2136 MCS DD Encoder error
  • 2137 MCS DD Encoder (slave sensor) error
  • 2138 MCS DD encoder initialization failure
  • 2139 MCS DD encoder (slave sensor) initialization failure
  • 2144 MCS Power supply unit overload
  • 2150 MCS Undefined alarm number
  • 2151 MCS Inverter unit fault
  • 2152 Mistake in data from MCS to NC
  • 2153 MCS CON APA deviation
  • 2154 MCS Power supply unit error
  • 2155 MCS Converter link error
  • 2156 MCS DC-bus voltage alarm
  • 2157 MCS Motor overcurrent
  • 2158 MCS Power unit overheat
  • 2159 MCS Power unit overload
  • 2160 MCS Supply voltage flutter
  • 2161 MCS Inverter capacity differs from spec.
  • 2162 MCS Winding change failure
  • 2163 MCS Encoder link error
  • 2164 MCS Encoder detected error
  • 2165 MCS Encoder initialization failure
  • 2166 MCS Encoder with shaft detected error
  • 2167 MCS Encoder with shaft initialization failure
  • 2168 MCS ABSO SCALE error
  • 2169 MCS ABSO SCALE initialization failure
  • 2170 MCS Magnetic encoder alarm
  • 2171 MCS Resolver alarm
  • 2172 MCS Pulse generator count over
  • 2173 MCS Motor overheat
  • 2174 MCS Servo link error
  • 2175 MCS Servo link disconnection
  • 2176 Mistake in data from NC to MCS
  • 2177 MCS Servo data error
  • 2178 MCS Illegal command
  • 2179 MCS CON speed over
  • 2180 MCS Speed command over
  • 2181 MCS DIFF over
  • 2182 MCS APA speed over
  • 2183 MCS Full-closed APA error
  • 2184 MCS Over speed
  • 2185 MCS Speed deviation over
  • 2186 MCS Collision detected
  • 2187 MCS Urgent-stop time over
  • 2188 MCS Belt is broken
  • 2189 MCS Axis change control error
  • 2190 MCS Independent encoder initialization failure
  • 2191 MCS Calculated current position lies outside range
  • 2192 MCS Motor overload
  • 2194 MCS ABSO SCALE sub-slider error
  • 2195 MCS Tandem control communication error
  • 2196 MCS Full abso scale link error
  • 2197 MCS Full abso scale error
  • 2198 MCS Full abso scale initialization failure
  • 2199 MCS Axis stop signal error
  • 2200 G-code error
  • 2201 M-code error
  • 2202 Common variable error
  • 2203 System variable error
  • 2204 Sequence name error
  • 2205 Numeric data error
  • 2206 Character use error
  • 2207 Program name error
  • 2208 Character string error
  • 2209 Hexadecimal data error
  • 2210 Spindle max revolution error
  • 2212 G132/G133 command error
  • 2213 Program factor over
  • 2214 Subscript left side incorrect
  • 2215 Local variable use over
  • 2216 System variable setting data over
  • 2217 Output variable setting data mistake
  • 2218 UNUSABLE G-code
  • 2219 UNUSABLE M-code
  • 2220 Subscript left side illegal
  • 2221 UNUSABLE output variable No
  • 2222 UNUSABLE input variable No
  • 2223 UNUSABLE turret direct code
  • 2224 UNUSABLE contour generation command
  • 2225 UNUSABLE Y-Z circle command
  • 2226 UNUSABLE thread cutting command
  • 2227 Mnemonic or local variable mistake
  • 2228 VSET sequence left command mistake
  • 2229 EXPRESSION right side
  • 2230 EXPRESSION calculation error
  • 2231 EXPRESSION syntax incorrect
  • 2232 EXPRESSION subscript mistake
  • 2233 EXPRESSION buffer over
  • 2234 EXPRESSION local variable
  • 2235 Equal does not exist
  • 2236 Program end code not found
  • 2237 BRANCH (IF,GOTO) sequence name
  • 2238 BRANCH(IF,GOTO) condition
  • 2239 Mistake in F command
  • 2240 Mistake in F/E command
  • 2241 Mistake in I command
  • 2242 Mistake in J command
  • 2243 Mistake in K command
  • 2244 Mistake in L command
  • 2245 Mistake in P command
  • 2246 Mistake in S command
  • 2247 No S command
  • 2248 Mistake in T command
  • 2249 Mistake in X command
  • 2250 Mistake in X/Z command
  • 2251 Mistake in Z command
  • 2252 Mistake in arc command
  • 2253 Mistake in angle command
  • 2254 Mistake in thread cutting cycle command
  • 2255 Mistake in arc radius command
  • 2256 Mistake in D command
  • 2257 Mistake in gauging cycle command
  • 2258 Mistake in C command
  • 2259 Mistake in SB command
  • 2260 Mistake in QA command
  • 2261 Mistake in X/Y command
  • 2262 Mistake in incremental command
  • 2263 Command required for X-, Y-axes
  • 2264 Mistake in Y command
  • 2265 Distance calculation over limit
  • 2266 Mistake in R command
  • 2267 Mistake in drilling cycle command
  • 2268 Mistake in angle command
  • 2269 Angle chamfering command error
  • 2270 Mistake in CD command
  • 2271 Mistake in CL command
  • 2272 Mistake in TM command
  • 2273 Mistake in W command
  • 2274 Mistake in CB command
  • 2275 Mistake in HP command
  • 2276 Mistake in CC command
  • 2277 Mistake in torque limit command
  • 2278 SUB PROGRAM repetition
  • 2279 SUB PROGRAM stack
  • 2280 SUB PROGRAM program name
  • 2281 SUB PROGRAM data print
  • 2282 SCHEDULE PROGRAM ‘Q’
  • 2283 SCHEDULE PROGRAM mnemonic code
  • 2284 SCHEDULE PROGRAM program end
  • 2285 SCHEDULE PROGRAM main program load
  • 2286 Plus variable limit over
  • 2287 Minus variable limit over
  • 2288 User reserve code
  • 2289 Unable to write backup data file
  • 2290 Program name not selected
  • 2291 Main sequence error
  • 2292 Restart failure
  • 2293 MDI special G-code
  • 2294 Special G-code table
  • 2295 STM time over
  • 2296 UGC No program end code
  • 2297 UGC DELETE syntax
  • 2298 UGC DEF syntax
  • 2299 UGC TIP syntax
  • 2300 UGC TIF syntax
  • 2301 UGC No shape entry
  • 2302 UGC Illegal numerical data
  • 2303 UGC Illegal character
  • 2304 UGC User variable
  • 2305 UGC System variable
  • 2306 UGC Illegal command
  • 2307 UGC Program factor over
  • 2308 UGC Coordinate data
  • 2309 UGC END syntax
  • 2310 UGC Command over
  • 2311 UGC Command format
  • 2312 UGC Additional parameter
  • 2313 UGC Expression
  • 2314 UGC Figure entry area over
  • 2315 UGC Unable to delete
  • 2316 READ/WRITE No spec
  • 2317 READ/WRITE Buffer over
  • 2318 READ/WRITE Device No.
  • 2319 READ/WRITE Data
  • 2320 READ communication error
  • 2321 WRITE communication error
  • 2322 GET/PUT No spec.
  • 2323 GET/PUT Buffer over
  • 2324 GET/PUT Number of digits
  • 2325 GET/PUT Variable designation
  • 2326 GET Numerical data
  • 2327 Calculation function no spec.
  • 2328 Sub-program no spec.
  • 2329 Sub-spindle interference distance
  • 2330 Input/output variable no spec.
  • 2331 Multiple machining no spec.
  • 2332 Sub-spindle no spec.
  • 2334 In-process gauging no spec.
  • 2335 Post-process gauging no spec.
  • 2336 Animation no spec.
  • 2337 Graphic backup data file write failure
  • 2338 Spindle orientation no spec.
  • 2339 Load monitor no spec.
  • 2340 Thread phase matching no spec.
  • 2341 Circular thread cutting no spec.
  • 2342 Circular thread cutting command
  • 2343 Tool retract no spec.
  • 2344 Tool retract interrupt enable com.
  • 2345 Tool retract interrupt disable com.
  • 2346 Tool retract interrupt return com.
  • 2347 ROBOT no spec.
  • 2348 ROBOT program name
  • 2349 LOADER no spec.
  • 2350 LOADER program name
  • 2351 Coupling device program select no spec.
  • 2353 CHAMFERING G01 mode
  • 2354 CHAMFERING L over
  • 2355 CHAMFERING L illegal order
  • 2356 CHAMFERING X, Z illegal order
  • 2357 CHAMFERING Any angle calculation
  • 2358 CHAMFERING Any angle
  • 2359 NOSE-R COMP. No spec.
  • 2360 NOSE-R COMP. NOSE-R > circle-R
  • 2361 NOSE-R COMP. Calculation
  • 2362 NOSE-R COMP. Cancel G00 G01
  • 2363 NOSE-R COMP. No cross point
  • 2364 NOSE-R COMP. Entrance command error
  • 2365 NOSE-R COMP. Thread cutting cycle
  • 2366 TOOL RADIUS COMP. No spec.
  • 2367 TOOL RADIUS COMP. NOSE-R comp. surface change
  • 2368 TOOL RADIUS COMP. C-axis separation
  • 2369 TOOL RADIUS COMP. QA command
  • 2370 TOW-ALONG TAILSTOCK MOVEMENT no spec.
  • 2371 TOW-ALONG TAILSTOCK MOVEMENT condition
  • 2372 LASER MEASUREMENT no spec.
  • 2373 LASER MEASUREMENT condition
  • 2374 LAP No spec.
  • 2375 LAP B illegal order
  • 2376 LAP D illegal order
  • 2377 LAP DA(DB) illegal order
  • 2378 LAP H illegal order
  • 2379 LAP H-U(W) < D (M73)
  • 2380 LAP U(W) illegal order
  • 2381 LAP U(W) > H
  • 2382 LAP XA(ZA), XB(ZB) illegal order
  • 2383 LAP Calculation error
  • 2384 LAP Down step number over
  • 2385 LAP Entry in LAP
  • 2386 LAP Sequence name
  • 2387 Unable to LAP Control
  • 2388 LAP No G-code
  • 2389 LAP NOSE-R comp. cancel
  • 2390 LAP Entry in NOSE-R comp.
  • 2391 LAP Shape designation
  • 2392 MULTI CYCLE B illegal order
  • 2393 MULTI CYCLE D illegal order
  • 2394 MULTI CYCLE F illegal order
  • 2395 MULTI CYCLE H illegal order
  • 2396 MULTI CYCLE H-U(W) < D (M73)
  • 2397 MULTI CYCLE I,K over
  • 2398 MULTI CYCLE I,K illegal order
  • 2399 MULTI CYCLE L illegal order
  • 2400 MULTI CYCLE Entry in LAP
  • 2401 MULTI CYCLE U(W) illegal order
  • 2402 MULTI CYCLE U(W) > H
  • 2403 MULTI CYCLE X,Z illegal order
  • 2404 MULTI CYCLE Angle
  • 2405 MULTI CYCLE Tool offset
  • 2406 MULTI CYCLE Cycle start point
  • 2407 MULTI CYCLE Entry in NOSE-R comp.
  • 2408 MULTI CYCLE Width
  • 2409 TOOL LIFE CONTROL no spec.
  • 2410 Tool life management No spare tool
  • 2411 TOOL LIFE CONTROL tool group
  • 2412 TOOL LIFE CONTROL no T-entry
  • 2413 TOOL LIFE CONTROL tool offset group
  • 2414 TOOL LIFE CONTROL no T-offset
  • 2415 MULTI-MACHINING CYCLE No spec.
  • 2416 MULTI-MACHINING CYCLE C
  • 2417 MULTI-MACHINING CYCLE I,K
  • 2418 MULTI-MACHINING CYCLE Q
  • 2419 MULTI-MACHINING CYCLE F
  • 2420 MULTI-MACHINING CYCLE L
  • 2421 MULTI-MACHINING CYCLE D
  • 2422 MULTI-MACHINING CYCLE X,Z
  • 2423 MULTI-MACHINING CYCLE SA
  • 2424 MULTI-MACHINING CYCLE Feed G94
  • 2425 MULTI-MACHINING CYCLE A
  • 2426 MULTI-MACHINING CYCLE Thread cycle
  • 2427 MULTI-MACHINING CYCLE U,W
  • 2428 MULTI-MACHINING CYCLE SB
  • 2429 MULTI-MACHINING CYCLE Y-axis mode
  • 2430 ATC no spec.
  • 2431 ATC syntax
  • 2432 ATC TC
  • 2434 ATC TL
  • 2435 ATC MT
  • 2436 ATC MG
  • 2438 Unable to M06/M228 command
  • 2440 Y-axis no spec.
  • 2441 2 saddle machine no spec.
  • 2444 Carrier axis variable limit over
  • 2445 3-D coordinate conversion
  • 2452 Chuck barrier area
  • 2453 Tailstock barrier area
  • 2456 W-axis minus variable limit over
  • 2457 X-axis correction stroke end over
  • 2459 Restart axis position is illegal
  • 2460 Change timing G13/G14
  • 2462 Change timing G122/G123
  • 2463 Change timing G140/G141/G142
  • 2464 Spindle/turret G-code
  • 2465 G122/G123 command mismatch
  • 2466 Unable to issue M100 command during Nose-R comp.
  • 2472 Y-axis control mode
  • 2475 W-axis command G-code
  • 2476 Mirror image coordinate selection
  • 2477 Sub-spindle mode
  • 2478 No workpiece coordinate mode command
  • 2479 Contour generation calculation error
  • 2480 G132/G133 command error
  • 2486 NC turret no spec.
  • 2487 Unable to select coordinates
  • 2488 UNUSABLE X-axis command
  • 2489 NC tailstock parameter error
  • 2490 Chuck pressure out of range
  • 2491 Horizon barrier intrusion
  • 2492 Interrupt program: illegal command
  • 2493 Linked external equipment program selection
  • 2494 Chuck pressure command illegal
  • 2495 Inverse time feed command format
  • 2496 CAM data cannot be transmitted.
  • 2497 T code
  • 2498 Learning cannot be executed.
  • 2499 Spindle marker latch data error
  • 2500 MULTI-MACHINING CYCLE HS,HI,HJ,HK
  • 2501 Recovering synchronous error
  • 2502 Block Delete command error
  • 2503 End sequence name error
  • 2504 PREMIUM THREAD Command error
  • 2505 CAM machine no spec.
  • 2506 Tool center point control not possible
  • 2507 CHP command error
  • 2508 Machining mode command format
  • 2509 MULTI-MACHINING CYCLE Return point
  • 2510 Mistake in torque skip cycle command
  • 2511 Remote buffer operation
  • 2512 M-tool spindle overload
  • 2513 Coordinate calculation
  • 2514 MULTI CYCLE C-axis shift
  • 2515 Remote buffer operation time out
  • 2516 Remote buffer operation communication error
  • 2517 W-axis control mode
  • 2518 Synchronized tapping command
  • 2519 Tailstock control command
  • 2520 Mistake in TP command
  • 2521 Mistake in BT command
  • 2522 Mistake in BA command
  • 2523 Thermistor error
  • 2524 Mistake in AT command
  • 2525 Chuck coordinate change condition
  • 2528 Program selection unsuitable
  • 2529 Thermal deviation compensation
  • 2530 Machining process instruction no.
  • 2531 Mirror turning mode
  • 2532 System variable set condition error
  • 2533 Steady rest over interference pos.
  • 2534 LBB turret rotation impossible
  • 2536 Coordinate movement rotation copy
  • 2537 SLANT PROCESS MODE
  • 2538 Incorrect system variable
  • 2539 Mistake in B command
  • 2541 PROGRAM PRINT command
  • 2542 Feed axis retract function command
  • 2543 Turret index error position
  • 2544 TOOL-ID TOOL DATA
  • 2545 MULTI-MACHINING CYCLE LD
  • 2546 MULTI-MACHINING CYCLE LK
  • 2547 No decimal point
  • 2548 X-, Z-axis synchronized feed mode
  • 2549 Tool no. mismatch after ATC sequence restart
  • 2550 Home position no spec.
  • 2551 External home position command
  • 2552 Barrier area
  • 2555 Linear guide cover interference area command
  • 2557 Illegal steady rest command
  • 2558 Turning position selection
  • 2559 Attachment rotation not possible
  • 2561 Illegal system command variable
  • 2562 Tool posture fluctuation reduction
  • 2563 Mistake in TE command
  • 2564 Index disable position
  • 2565 Load monitor system variable
  • 2566 MULTI-MACHINING CYCLE No M-tool cycle command
  • 2567 No helical cutting specifications
  • 2568 Mistake in OF command
  • 2569 Thermal deviation comp. backup failure
  • 2570 W-axis position condition
  • 2571 W-axis position no spec.
  • 2572 Mistake in RC command
  • 2573 Taper cutting cycle
  • 2575 Mistake in ‘TD’,’TDG’,’OS’ commands
  • 2576 Mistake in H command
  • 2577 No axis movement command
  • 2578 NO D COMMAND
  • 2579 NO L COMMAND
  • 2580 Mistake in XS command
  • 2581 CAM data deployment mode
  • 2582 CAM data file write protect
  • 2583 Compensation value overflow
  • 2584 CON speed XS-axis
  • 2585 XS-axis command turret mode
  • 2586 Synchronous mode execution impossible
  • 2587 No A command
  • 2588 Mistake in OF command
  • 2589 Definition conditions
  • 2590 Y-axis command
  • 2591 Mistake in point command
  • 2592 Transport barrier entry command
  • 2593 Mistake in CF command
  • 2594 Mistake in RJ command
  • 2595 Synchronized rotation speed over
  • 2596 Synchronized tap overload
  • 2597 G15 command
  • 2598 No Spec code. “Tool information management spec”
  • 2599 Command not possible while mounting LBB.
  • 2600 LAW-V machine no spec.
  • 2601 Unable to issue T/TE command simultaneously
  • 2602 SCHEDULE PROGRAM main program load
  • 2603 Spindle rotation fluctuation control no spec.
  • 2604 Tow-along steady rest no spec.
  • 2605 Tow-along tailstock no spec.
  • 2606 READ/WRITE file open
  • 2607 Mistake in AP command
  • 2608 Mistake in ON command
  • 2609 A-axis control no spec.
  • 2610 Zero offset select inpossible
  • 2611 Spindle fluctuation control no spec.
  • 2612 Mistake in TR command
  • 2613 Mistake in MTM command
  • 2614 Mistake in MTS command
  • 2615 Mistake in MGS command
  • 2616 B-axis mode
  • 2617 Zero setting condition
  • 2618 Workpiece detection sensor not ready
  • 2619 Mistake in SW command
  • 2622 Unset system variable read
  • 2623 B-axis no spec.
  • 2624 Tow-along steady rest type-B no spec
  • 2625 Tow-along steady rest movement condition
  • 2626 W-axis overlap
  • 2628 Mistake in TW command
  • 2629 Mistake in FW command
  • 2630 Mistake in SC command
  • 2631 DNC-DT Path name
  • 2632 DNC-DT Program select
  • 2633 DNC-DT Preload error
  • 2634 DNC-DT Delete error
  • 2635 Y-axis mode
  • 2637 No axis movement command
  • 2638 A/B saddle synchronized motion command
  • 2639 Unable to issue C-axis command during helical cutting
  • 2640 AC thread rotation count error
  • 2641 AC thread fluctuation control not possible
  • 2642 READ/WRITE No empty SAT
  • 2643 READ/WRITE File open
  • 2644 Unusable PRINT request
  • 2645 YS-axis position
  • 2646 SYSTEM VARIABLE C-axis separation
  • 2648 MG tool ready cycle no spec.
  • 2649 SYSTEM VARIABLE Y-axis mode
  • 2650 SYSTEM VARIABLE B-axis mode
  • 2651 C-axis multi rotation mode
  • 2652 Mistake in HA command
  • 2653 Mistake in MN command
  • 2654 Hob circular cutting command
  • 2655 Hob cutting command
  • 2657 SYSTEM VARIABLE C-axis connect
  • 2658 B-axis independent encoder error
  • 2659 NC tailstock position error
  • 2662 NC TAILSTOCK no spec.
  • 2663 Turning cut condition interlock
  • 2667 X-axis mirror image coordinates selected
  • 2668 X-axis mirror image coordinates impossible
  • 2671 C-axis sync control no spec.
  • 2672 C-axis sync command format
  • 2674 Default status macro cannot be executed
  • 2675 Tool posture command error
  • 2676 Tool posture command angle conversion error
  • 2677 Attachment change not possible
  • 2678 SPM contour control not possible
  • 2679 Mistake in Q command
  • 2682 Magnetic encoder speed detection error
  • 2683 MCS Rotary encoder 5 initialization failure
  • 2684 MCS Rotary encoder 5 error
  • 2685 MCS Rotary encoder 4 initialization failure
  • 2686 MCS Rotary encoder 4 error
  • 2687 MCS Rotary encoder 3 initialization failure
  • 2688 MCS Rotary encoder 3 error
  • 2689 MCS Rotary encoder 2 error
  • 2690 MCS Rotary encoder 1 initialization failure
  • 2691 MCS Rotary encoder 1 error
  • 2692 MCS Linear scale 4 initialization failure
  • 2693 MCS Linear scale 4 error
  • 2694 MCS Linear scale 3 initialization failure
  • 2695 MCS Linear scale 3 error
  • 2696 MCS Linear scale 2 initialization failure
  • 2697 MCS Linear scale 2 error
  • 2698 MCS Linear scale 1 initialization failure
  • 2699 MCS Linear scale 1 error
  • 2700 No workpiece confirmation error
  • 2701 Sequencer Error
  • 2702 Spindle command during C-axis connection
  • 2703 Chucking miss
  • 2704 Chucking miss air off order impossible
  • 2705 Tailstock quill over advance
  • 2706 Polygon cutting command condition
  • 2707 Invalid command during polygon cutting
  • 2708 Invalid rotation tool gear
  • 2709 Sub-spindle synchronization interlock
  • 2710 Sub-spindle synchronization cutting
  • 2711 Door open
  • 2712 ATC no spec.
  • 2713 Invalid ATC syntax
  • 2714 Invalid ATC TC no.
  • 2716 Invalid ATC TL no.
  • 2717 Invalid ATC MT no.
  • 2718 Invalid ATC MG no.
  • 2719 Invalid ATC command
  • 2720 M06/M228 interlock
  • 2721 Turret number mismatch
  • 2722 Robot/Loader request illegal
  • 2723 ATC next tool preparation interlock
  • 2724 Invalid ATC sub arm
  • 2725 Invalid RS tool L/M
  • 2726 Magazine encoder read
  • 2727 Magazine rotation interlock
  • 2728 Invalid magazine tool no.
  • 2729 No magazine return pot
  • 2730 Tool insertion interlock
  • 2732 Tailstock sleeve position data error
  • 2733 Coolant flow
  • 2734 Coolant level
  • 2735 Spindle low rotation command
  • 2736 SVP time constant switching no spec.
  • 2737 Invalid tailstock switch position
  • 2738 Synchronous hobbing interlock
  • 2739 Invalid synchronous hobbing mode
  • 2740 Incorrect magazine tool data
  • 2741 Touch setter unlock time over
  • 2742 Setup switch ON
  • 2743 Irregular coolant level
  • 2744 Tool breakage
  • 2745 Low high-pressure coolant pressure
  • 2746 Hydraulic oil unit error
  • 2747 Index disable position
  • 2748 CPU fan stop
  • 2749 Hydraulic oil level lower limit
  • 2750 Tool monitoring unit error detection
  • 2751 Coolant/Oil mist command
  • 2752 Air pressure
  • 2753 Unable to change tool
  • 2754 Invalid coolant command
  • 2755 Semi-dry unit error
  • 2756 Actual tool data setting
  • 2757 Oil mist unit error
  • 2758 Invalid position data
  • 2759 Coolant discharge error
  • 2760 Sub-spindle rotation tool interlock
  • 2761 W-axis overlap mode
  • 2762 Chucking miss
  • 2763 Coolant filter
  • 2764 Coolant error
  • 2765 Chip conveyer filter clogged
  • 2766 Invalid M-tool spindle command
  • 2767 M-spindle low rotation interlock
  • 2768 Program check mode interlock
  • 2769 Invalid spindle control command
  • 2770 SVP time constant switching command
  • 2771 APC clamp confirmation
  • 2772 APC system mode
  • 2773 APC M command
  • 2774 Thread cutting cycle interlock
  • 2775 Sensor head interlock
  • 2776 M command not completed
  • 2777 Cross rail positioning sensor error
  • 2778 Cross rail motor overload
  • 2779 Axis lube motor overload
  • 2780 Axis lube pressure ON confirmation
  • 2781 No AT command
  • 2782 Axis lube pressure OFF confirmation
  • 2783 Oil hole motor overload
  • 2784 Invalid MT command
  • 2785 Invalid AT command
  • 2786 No S command
  • 2787 No SB command
  • 2788 Invalid SB command
  • 2789 Coolant tank filter clogged
  • 2790 Shower coolant motor overload
  • 2791 M spindle head cooling unit
  • 2792 Invalid RH command
  • 2793 Incorrect attachment index position
  • 2794 Mist air lube unit
  • 2795 Warming up error
  • 2796 Sequence restart
  • 2797 Axis interlock release
  • 2798 Invalid BC command
  • 2800 Alarm detected from externally connected device
  • 2801 Turret rotation interlock
  • 2802 Invalid long boring bar command
  • 2803 ATC tool data setting
  • 2804 Attachment control
  • 2805 Limit confirmation impossible
  • 2806 Door interlock
  • 2807 Invalid M code
  • 2848 Chip conveyer overload
  • 2849 Sensor unit in interference range
  • 2850 External request interlock
  • 2851 Machine change M-code
  • 2852 Hand open/close interlock
  • 2853 Teaching operation interlock
  • 2854 Machine linked M-code
  • 2855 Coolant filter
  • 2856 Coolant motor overload
  • 2857 UNUSABLE M-code
  • 2858 Hand slide advance interlock
  • 2887 Coupling device interlock
  • 2888 Lube tank level
  • 2890 Workpiece clamp miss
  • 2891 Tailstock air miss
  • 2892 Unable to execute air shut-off command
  • 2893 Hydraulic oil controller faulty
  • 2894 Spindle lubricant controller error
  • 2895 Coolant controller error
  • 2896 No touch setter
  • 2897 Unloader no spec.
  • 2898 Unloader interference position
  • 2899 Gauge error
  • 2900 DIRECTION V variable
  • 2901 DIRECTION Check address
  • 2902 DIRECTION Data operation
  • 2903 DIRECTION Character use
  • 2904 DIRECTION Numerical data
  • 2905 DIRECTION Parameter/point
  • 2906 DIRECTION Register
  • 2907 DIRECTION F
  • 2908 DIRECTION E
  • 2909 DIRECTION Sequence no.
  • 2910 UNUSABLE G-code
  • 2911 UNUSABLE M-code
  • 2912 UNUSABLE Address character
  • 2913 UNUSABLE Mnemonic
  • 2914 UNUSABLE Left side direction
  • 2915 EXPRESSION Calculation
  • 2916 EXPRESSION Syntax
  • 2917 EXPRESSION Right side
  • 2918 EXPRESSION Left side
  • 2919 EXPRESSION Buffer over
  • 2920 VARIABLE Buffer over
  • 2921 PROGRAM DIRECT Program name
  • 2922 PROGRAM DIRECT V variable
  • 2923 PROGRAM DIRECT Character use
  • 2924 PROGRAM DIRECT G-code
  • 2925 BRANCH Sequence name
  • 2926 BRANCH Condition
  • 2927 Parameter setting illegal
  • 2928 Parameter playback impossible
  • 2929 Register setting impossible
  • 2930 Program plus var. limit over
  • 2931 Program minus var. limit over
  • 2932 Program request illegal
  • 2933 Program request impossible
  • 2934 Program external request impossible
  • 2935 No program selection
  • 2936 No program
  • 2937 Program end code
  • 2938 Program analysis complete
  • 2939 SUB PROGRAM stack
  • 2940 SUB PROGRAM Program name
  • 2941 SUB PROGRAM Buffer over
  • 2942 Command impossible while running
  • 2943 Data file read
  • 2944 Comment end code not found
  • 2945 Equal does not exist
  • 2946 No spec.
  • 2948 DIRECTION Y
  • 2949 DIRECTION Z
  • 2950 DIRECTION D
  • 2951 DIRECTION L
  • 2952 DIRECTION SU
  • 2953 DIRECTION Torque limit
  • 2954 PROGRAM DIRECT M-code
  • 2955 PROGRAM DIRECT Equal
  • 2956 Machine change M-code
  • 2957 G22 feed
  • 2958 Main sequence
  • 2959 Barrier limit
  • 2960 User reserve code
  • 2961 Calculation function no spec.
  • 2962 Subscript function no spec.
  • 2964 NC program selection
  • 2965 EXPRESSION subscript
  • 2966 M code time over
  • 2967 Cycle time over
  • 2968 Program selection
  • 2969 G23 FEED
  • 2970 DIRECTION X
  • 2971 DIRECTION I
  • 2972 DIRECTION J
  • 2973 DIRECTION K
  • 2974 PROGRAM DIRECT hexadecimal data
  • 2975 PROGRAM DIRECT character string
  • 2976 Stopper position data illegal
  • 2977 Program selection unsuitable
  • 2978 DIRECTION V
  • 2979 DIRECTION C
  • 2980 No decimal point
  • 2981 DIRECTION Q
  • 2982 Time over

Lỗi máy CNC Okuma Alarm C List

Sau đây là liệt kê danh sách Lỗi máy CNC Okuma Alarm C List  for Okuma OSP-P300S/P300L CNC systems.

  • 3055 Device temperature too high
  • 3056 Non-functioning device detected
  • 3057 Unable to start during virus scan
  • 3120 Overload detected.
  • 3122 Maintenance (by user) necessary
  • 3132 VDU communication error
  • 3133 VDU detected error
  • 3134 VDU initialization failure
  • 3135 MCS DD encoder link error
  • 3136 MCS DD Encoder error
  • 3137 MCS DD Encoder (slave sensor) error
  • 3138 MCS DD encoder initialization failure
  • 3139 MCS DD encoder (slave sensor) initialization failure
  • 3144 MCS Power supply unit overload
  • 3150 MCS Undefined alarm number
  • 3151 MCS Inverter unit fault
  • 3152 Mistake in data from MCS to NC
  • 3153 MCS CON APA deviation
  • 3154 MCS Power supply unit error
  • 3155 MCS Converter link error
  • 3156 MCS DC-bus voltage alarm
  • 3157 MCS Motor overcurrent
  • 3158 MCS Power unit overheat
  • 3159 MCS Power unit overload
  • 3160 MCS Supply voltage flutter
  • 3161 MCS Inverter capacity differs from spec.
  • 3162 MCS Winding change failure
  • 3163 MCS Encoder link error
  • 3164 MCS Encoder detected error.
  • 3165 MCS Encoder initialization failure
  • 3166 MCS Encoder with shaft detected error
  • 3167 MCS Encoder with shaft initialization failure
  • 3168 MCS ABSO SCALE error
  • 3169 MCS ABSO SCALE initialization failure
  • 3170 MCS Magnetic encoder alarm
  • 3171 MCS Resolver alarm
  • 3172 MCS Pulse generator count over
  • 3173 MCS Motor overheat
  • 3174 MCS Servo link error
  • 3175 MCS Servo link disconnection
  • 3176 Mistake in data from NC to MCS
  • 3177 MCS Servo data error
  • 3178 MCS Illegal command
  • 3179 MCS CON speed over
  • 3180 MCS Speed command over
  • 3181 MCS DIFF over
  • 3182 MCS APA speed over
  • 3183 MCS Full-closed APA error
  • 3184 MCS Over speed
  • 3185 MCS Speed deviation over
  • 3186 MCS Collision detected
  • 3187 MCS Urgent-stop time over
  • 3188 MCS Belt is broken
  • 3189 MCS Axis change control error
  • 3190 MCS Independent encoder initialization failure
  • 3191 MCS Calculated current position lies outside range
  • 3192 MCS Motor overload
  • 3194 MCS ABSO SCALE sub-slider detected error
  • 3195 MCS Tandem control communication error
  • 3196 MCS Full abso scale link error
  • 3197 MCS Full abso scale error
  • 3198 MCS Full abso scale initialization failure
  • 3199 MCS Axis stop signal error
  • 3202 User reserve code
  • 3203 Warm up run
  • 3204 Running time over
  • 3205 Work counter over
  • 3206 Cycle time over
  • 3207 DNC Start conditions
  • 3208 DNC Initialization sequence impossible
  • 3209 DNC Illegal text from host
  • 3210 DNC Incorrect machine No.
  • 3211 DNC Text format error
  • 3212 DNC Text receipt error
  • 3213 DNC Text transmission error
  • 3214 FMS Coupling mode change
  • 3215 FMS HOST CPU alarm
  • 3216 FMS Operation mode select
  • 3217 DNC-B buffer operation
  • 3218 DNC-B buffer operation change
  • 3226 Common unit illegal
  • 3231 Program select
  • 3232 Load monitor overload
  • 3238 ROBOT alarm/reset
  • 3240 LOADER alarm/reset
  • 3241 Post-process gauging Unable to transmit
  • 3242 Post-process gauging Unable to receive
  • 3243 Post-process gauging Time out
  • 3244 Post-process gauging Data format error
  • 3245 Gauging data out
  • 3246 CEJ MATIC Data NG
  • 3247 CEJ MATIC Data read
  • 3248 Size catcher Data NG
  • 3249 Size catcher Gauging error
  • 3250 Size catcher Unable to transmit
  • 3251 Size catcher Unable to receive
  • 3252 Size catcher Time out
  • 3253 Size catcher Data format error
  • 3254 Schedule program start
  • 3255 Main program start
  • 3261 Tool life management No spare tool.
  • 3264 RS-232C communication illegal
  • 3266 Workpiece counter full count
  • 3271 Gauging sensor battery change
  • 3279 DNC Machining start conditions
  • 3280 DNC Data receipt start conditions
  • 3289 Load monitor low load
  • 3295 Quality check alarm
  • 3300 Tool data output
  • 3314 External tool offset input
  • 3316 Position encoder adjustment required.
  • 3319 DNC Ethernet receipt command not allowed.
  • 3320 DNC Ethernet receipt error
  • 3321 DNC Ethernet transmission error
  • 3331 NC tailstock position error
  • 3332 Reboot machine.
  • 3682 Magnetic encoder speed detection error
  • 3683 MCS Rotary encoder 5 initialization failure
  • 3684 MCS Rotary encoder 5 error
  • 3685 MCS Rotary encoder 4 initialization failure
  • 3686 MCS Rotary encoder 4 error
  • 3687 MCS Rotary encoder 3 initialization failure
  • 3688 MCS Rotary encoder 3 error
  • 3689 MCS Rotary encoder 2 error
  • 3690 MCS Rotary encoder 1 initialization failure
  • 3691 MCS Rotary encoder 1 error
  • 3692 MCS Linear scale 4 initialization failure
  • 3693 MCS Linear scale 4 error
  • 3694 MCS Linear scale 3 initialization failure
  • 3695 MCS Linear scale 3 error
  • 3696 MCS Linear scale 2 initialization failure
  • 3697 MCS Linear scale 2 error
  • 3698 MCS Linear scale 1 initialization failure
  • 3699 MCS Linear scale 1 error
  • 3700 Power save ON
  • 3701 CPU temperature
  • 3702 Warm up run
  • 3703 Oil filter
  • 3704 Lube tank flow
  • 3705 Lube tank level
  • 3706 Spindle lube pressure
  • 3707 Spindle cooler error
  • 3708 Oil cooler error
  • 3709 Coolant level
  • 3710 Air blow pressure
  • 3711 Air pressure
  • 3712 Program selection interlock
  • 3713 Chip conveyer overload
  • 3714 ZA-axis overload
  • 3715 ZB-axis overload
  • 3716 XA-axis overload
  • 3717 XB-axis overload
  • 3718 Coupling device error
  • 3719 ROBOT control
  • 3720 ROBOT alarm/reset
  • 3721 ROBOT/LOADER control
  • 3722 LOADER alarm/reset
  • 3723 Schedule program start
  • 3724 Main program start
  • 3725 CEJ MATIC data NG
  • 3726 CEJ MATIC data read
  • 3727 Auto power off impossible
  • 3728 Oil cooler level
  • 3729 Coolant error
  • 3730 Coolant flow
  • 3731 Coolant abnormal
  • 3732 Robot/loader axis safety speed over
  • 3733 Robot/loader safety speed monitor error
  • 3734 ATC step time over
  • 3735 Next tool preparation impossible
  • 3736 Coolant filter
  • 3737 Mist collector
  • 3738 Mode switch operation prohibited
  • 3739 Control box air conditioner error
  • 3740 Air filter clogged
  • 3741 Index chuck oil level
  • 3742 ATC-axis circuit breaker
  • 3743 ATC-axis motor overload
  • 3744 Chucking miss air
  • 3745 Mist lubrication unit
  • 3746 External start switch
  • 3747 NC start button
  • 3748 Door sensor
  • 3749 Automatic lubrication system error
  • 3750 Tailstock absolute encoder error
  • 3751 Invalid external tool offset input
  • 3752 Coolant supply
  • 3753 Drain tank
  • 3754 Mist collector
  • 3755 Workpiece conveyor error
  • 3756 Unmachined workpiece detection
  • 3757 Bar feeder error
  • 3758 Oil mist error
  • 3759 Tool monitoring unit error detection
  • 3760 Fan cooling unit pressure
  • 3761 TOOL change not possible
  • 3762 ACC step time over
  • 3763 Switch disabled
  • 3764 Oil controller unit
  • 3765 Spindle vibration sensor
  • 3766 Coupling device interlock
  • 3767 Tailstock holding miss check air
  • 3768 Irregular coolant level
  • 3769 Side cover open
  • 3770 Safety door open
  • 3771 Lube tank motor run time over
  • 3772 Coolant flow
  • 3773 Earthquake detected
  • 3774 EC circuit breaker
  • 3775 Lubrication unit error
  • 3777 Air blow flow
  • 3778 M axis cooling fan overload
  • 3779 APC system conditions
  • 3780 Touch setter unit error
  • 3781 EC overload
  • 3782 Sensor contact signal error
  • 3783 ATC interlock
  • 3784 Fire extinguish unit power OFF
  • 3785 Spindle lubrication unit
  • 3786 Chip flush-out motor overload
  • 3787 M-axis unit command mismatch
  • 3788 AAC system condition
  • 3789 Air dryer unit error
  • 3790 Ext. program select parity check
  • 3791 Mist air lubrication unit
  • 3792 Chucking miss
  • 3793 Coolant level low
  • 3794 Power source unit overload
  • 3795 Hydraulic oil unit
  • 3796 RSS unit battery error
  • 3797 RSS unit communication error
  • 3798 Unloader interlock
  • 3800 Transfer data error
  • 3843 Safety fence open
  • 3844 Invalid loader grease lubrication input
  • 3845 Coolant level lower limit
  • 3846 M/C panel at interfering position
  • 3847 Invalid limit/proximity switch
  • 3848 Anti-gouge unit faulty
  • 3849 Tool counter full count
  • 3850 External alarm
  • 3851 Tool counter faulty
  • 3852 Tail stock chuck position
  • 3853 Invalid loader limit/proximity switch
  • 3854 Chip conveyor stop
  • 3855 Oil air unit oil level low
  • 3856 Coolant motor overload
  • 3857 Oil skimmer overload
  • 3858 Chuck grip confirmation unit faulty
  • 3859 Fire extinguisher error
  • 3860 Fire extinguisher power OFF or error
  • 3861 Chip conveyer filter clogged
  • 3862 Filtration unit error
  • 3874 Sub chip conveyor error
  • 3875 Absolute encoder controller error
  • 3876 Workpiece loading unit stop signal ON
  • 3877 Workpiece counter full count
  • 3878 Concentrated chip conveyor
  • 3879 Gauging NG
  • 3880 Spindle air purge pressure
  • 3881 Turnover cycle time over
  • 3882 Start impossible
  • 3883 Chip crusher error
  • 3884 Workpiece puller operation incomplete
  • 3885 No workpiece
  • 3886 Workpiece present
  • 3887 Temperature control unit error
  • 3888 Chip conveyor faulty
  • 3889 EExternal start signal ON
  • 3890 Low level in oil tank
  • 3891 Multi-counter tool life
  • 3892 Hydraulic oil level lower limit
  • 3893 Hydraulic unit oil controller
  • 3894 Spindle lubrication controller error
  • 3895 Coolant controller error
  • 3896 Tool change count-up
  • 3897 Workpiece stocker full
  • 3898 Cooler error
  • 3900 User reserve code
  • 3901 External

Lỗi máy CNC Okuma Alarm D List

Sau đây là liệt kê danh sách Lỗi máy CNC Okuma Alarm D List  for Okuma OSP-P300S/P300L CNC systems.

  • 4035 Replace memory board battery
  • 4036 Key-code data receipt error
  • 4037 CCP-CPU error
  • 4052 PLC backup data file write
  • 4054 ACP key-code data receipt error
  • 4055 Safety speed clamping
  • 4056 Adjusting Type-J encoder
  • 4057 Battery life
  • 4058 Previous backup error
  • 4059 Backup file error
  • 4060 AlarmService internal error
  • 4061 UPS Service error
  • 4062 Remote Diagnosis error
  • 4063 DNC2 communication error
  • 4064 Awaiting establishment of DeviceNet
  • 4065 FL-net transmission error
  • 4066 FL-net transmission failure
  • 4067 Maintenance necessary
  • 4068 Non-responsive software detected
  • 4069 Turret index sequence has not ended.
  • 4070 Solid model position error
  • 4071 CAS environment file cannot be changed
  • 4072 Turret position error
  • 4076 CAS software calculation error
  • 4077 Turning interlock of CAS
  • 4078 Error occurred during CAS
  • 4080 Collision Avoidance Function OFF
  • 4081 In-position/droop check waiting status
  • 4083 Windows updated. Reboot
  • 4084 Virus has been detected.
  • 4085 Fan motor error at panel computer unit
  • 4086 UPS not functioning
  • 4087 Non-functioning device detected
  • 4088 Virus Detect Function active
  • 4090 Machine relocation detected
  • 4091 Var. lost motion cannot be applied.
  • 4092 MCS Parameter learning
  • 4100 Collision avoidance position
  • 4101 CAS software environment being changed
  • 4102 Awaiting CAS software process
  • 4103 Drawing speed over
  • 4104 CAS processing time over
  • 4105 Collision block detected
  • 4106 Collision Avoidance system OFF
  • 4107 Awaiting CAS check result
  • 4108 Inaccurate material shape
  • 4109 CAS operating in rapid mode
  • 4110 Turret collision check not performed
  • 4120 Overload detected
  • 4121 General overload detection disabled
  • 4122 Maintenance (by user) necessary
  • 4130 MCS Inertia identification
  • 4131 VDU initialization failure
  • 4132 VDU communication error
  • 4133 VDU error
  • 4134 MCS Alarm-D occurred
  • 4135 MCS DD encoder link error
  • 4136 MCS DD encoder error
  • 4137 MCS DD encoder (slave sensor) detected error
  • 4138 MCS DD encoder initialization failure
  • 4139 MCS DD encoder (slave sensor) initialization failure
  • 4141 MCS Push reset button to stop spindle
  • 4144 MCS power supply unit overload
  • 4145 MCS Drive unit external cooling fan stop
  • 4147 MCS Drive unit internal cooling fan stop
  • 4148 MCS Power supply unit external cooling fan stop
  • 4149 MCS Power supply unit internal cooling fan stop
  • 4150 MCS Undefined alarm number
  • 4151 MCS Inverter unit fault
  • 4152 Mistake in data from MCS to NC
  • 4153 MCS CON APA deviation
  • 4154 MCS Power supply unit error
  • 4155 MCS Converter link error
  • 4156 MCS DC-bus voltage alarm
  • 4157 MCS Motor overcurrent
  • 4158 MCS Power unit overheat
  • 4159 MCS Power unit overload
  • 4160 MCS Supply voltage flutter
  • 4161 MCS Inverter capacity differs from spec.
  • 4162 MCS Winding change failure
  • 4163 MCS Encoder link error
  • 4164 MCS Encoder detected error
  • 4165 MCS Encoder initialization failure
  • 4166 MCS Encoder with shaft detected error
  • 4167 MCS Encoder with shaft initialization failure
  • 4168 MCS ABSO SCALE error
  • 4169 MCS ABSO SCALE initialization failure
  • 4170 MCS Magnetic encoder alarm
  • 4171 MCS Resolver alarm
  • 4172 MCS Pulse generator count over
  • 4173 MCS Motor overheat
  • 4174 MCS Servo link error
  • 4175 MCS Servo link disconnection
  • 4176 Mistake in data from NC to MCS
  • 4177 MCS Servo data error
  • 4178 MCS Illegal command
  • 4179 MCS CON speed over
  • 4180 MCS Speed command over
  • 4181 MCS DIFF over
  • 4182 MCS APA speed over
  • 4183 MCS Full-closed APA error
  • 4184 MCS Over speed
  • 4185 MCS Speed deviation over
  • 4186 MCS Collision detected
  • 4187 MCS Urgent-stop time over
  • 4188 MCS Belt is broken
  • 4190 MCS Independent encoder initialization failure
  • 4191 MCS Calculated current position lies outside range
  • 4192 MCS Motor overload
  • 4194 MCS ABSO SCALE sub-slider detected error
  • 4195 MCS Tandem control communication error
  • 4196 MCS Full abso scale link error
  • 4197 MCS Full abso scale error
  • 4198 MCS Full abso scale initialization failure
  • 4199 MCS Axis stop signal error
  • 4200 Reboot enabled parameter set
  • 4201 MACHINING MANAGEMENT data backup stop
  • 4202 DNC-B Communication system abort
  • 4203 DNC-B Communication error
  • 4204 DNC-B Message format error
  • 4205 H1 turret interference barrier parameter not set
  • 4206 SPM Parameter unsuitable
  • 4207 Unable to execute Hi-CUT Pro control
  • 4208 G265/G264 commands: Unusable address character
  • 4209 Hi-CUT Pro parameter out of range (replacing)
  • 4210 SPM contour control not possible
  • 4211 SPM parameter out of range (replacing)
  • 4214 RS232C communication not ready
  • 4215 Communication buffer over
  • 4216 Communication procedure No response
  • 4217 Communication procedure NAK/WACK
  • 4218 Communication procedure Illegal text
  • 4219 Communication procedure ENQ
  • 4220 Communication procedure EOT
  • 4221 Communication procedure TTD
  • 4223 Motor not ready to start
  • 4224 Canceling stroke end limit
  • 4225 Pitch compensation data calculation
  • 4226 MSB load error
  • 4227 External start not possible
  • 4228 SSynchronized rotation speed over
  • 4230 Torque limit recovery
  • 4232 Backup data read/write
  • 4237 Magazine operation panel communication error
  • 4238 Please open magazine door
  • 4240 Tool life management No spare tool
  • 4242 Parameter set value incorrect
  • 4245 Waiting program selection during program operation.
  • 4247 Main spindle max. speed designation
  • 4248 DNC NC receipt start conditions
  • 4249 Tool life warning
  • 4251 Axis feed rate restriction
  • 4252 Detector operation check mode
  • 4258 Y-axis cancel mode
  • 4261 Workpiece counter over
  • 4267 PLC link error
  • 4268 PLC communication error
  • 4269 ROBOT control
  • 4274 User reserve code
  • 4281 Workpiece counter over
  • 4284 Thermistor error
  • 4285 Thermal deviation compensation
  • 4288 PSC Learn converge protect error
  • 4289 Spindle able to enter transportation barrier
  • 4290 TCP/IP communication error
  • 4291 Position encoder auto adjustment
  • 4292 Please check the program
  • 4294 Extended Y-axis plus variable limit
  • 4295 TDC parameter not set
  • 4297 Main Magazine tool Quantity over
  • 4298 DNC Ethernet communication error
  • 4300 B-axis independent encoder connecting
  • 4301 Tail-stock position error
  • 4302 Please supply oil of chuck
  • 4303 Movement to sizing position stopped
  • 4304 No axis movement after offset change
  • 4305 Y-axis not at turning position
  • 4306 Turret movement decelerating
  • 4307 Alarm-A at other system
  • 4308 X-axis over limit
  • 4309 Clutch A slip monitor OFF
  • 4311 Interrupt program
  • 4314 Learning required for cam data
  • 4315 Permissible value exceeded
  • 4316 Manual feed invalid
  • 4345 Unable to execute feed axis retract function
  • 4346 ZA-W interference parameter not set
  • 4347 TDC invalid
  • 4348 X-C-axis coordinate value error
  • 4349 Mode switching impossible
  • 4682 Magnetic encoder speed detection error
  • 4683 MCS Rotary encoder 5 initialization failure
  • 4684 MCS Rotary encoder 5 error
  • 4685 MCS Rotary encoder 4 initialization failure
  • 4686 MCS Rotary encoder 4 error
  • 4687 MCS Rotary encoder 3 initialization failure
  • 4688 MCS Rotary encoder 3 error
  • 4689 MCS Rotary encoder 2 error
  • 4690 MCS Rotary encoder 1 initialization failure
  • 4691 MCS Rotary encoder 1 error
  • 4692 MCS Linear scale 4 initialization failure
  • 4693 MCS Linear scale 4 error
  • 4694 MCS Linear scale 3 initialization failure
  • 4695 MCS Linear scale 3 error
  • 4696 MCS Linear scale 2 initialization failure
  • 4697 MCS Linear scale 2 error
  • 4698 MCS Linear scale 1 initialization failure
  • 4699 MCS Linear scale 1 error
  • 4700 External cycle start interlock
  • 4701 Chip conveyer overload
  • 4702 Cycle start interlock
  • 4703 Canceling stroke end limit
  • 4704 Please open door
  • 4705 Door interlock all axis stop
  • 4706 Canceling door interlock
  • 4707 Enabling Switch faulty
  • 4708 ATC system mode
  • 4709 Power sequence error
  • 4710 Parameter non set
  • 4711 Spindle motor not ready to start
  • 4712 Reboot enabled parameter set
  • 4713 Executing power OFF sequence
  • 4714 Workpiece counter full count
  • 4715 Preparing for warming up
  • 4716 Motor not ready to start
  • 4717 Dual cycle start button interlock
  • 4718 Invalid parameter setting
  • 4719 Please open side cover
  • 4720 Dual cycle start button interlock
  • 4721 Feed rate limitation
  • 4722 System check mode
  • 4723 Machine enabling button pressed
  • 4724 Please open safety fence
  • 4725 Please close front door
  • 4726 Opposite side front door open
  • 4727 Safety fence open
  • 4728 Please close other side front door
  • 4729 Please open magazin door
  • 4730 Magazine door open
  • 4731 Multiple safety guards open
  • 4732 Gauging sensor power ON
  • 4733 Measurement system error
  • 4734 Please close safety guards
  • 4735 Full of chips
  • 4736 Sensor head
  • 4737 Other door open
  • 4738 Magazine OP panel COMM error
  • 4739 Turret not ready to start
  • 4740 2nd Spindle control interlock
  • 4741 Magazine operation panel manual interrupt
  • 4742 Turret encoder offset disabled area
  • 4743 Turret index disabled area
  • 4744 Turnover cycle
  • 4745 REDUCE switch operation error
  • 4746 Tool change mode sw operation error
  • 4747 Gauging sensor battery change
  • 4748 Additional coolant level low
  • 4749 Please close door
  • 4750 Safety interlock
  • 4751 Tailstock quill interlock
  • 4752 Tailstock absolute coder error
  • 4753 Workpiece hand control
  • 4754 Bar stock empty
  • 4755 Roof window open interlock
  • 4756 Canceling robot/loader and machine interlock
  • 4757 Sp. oil air lub. air extraction mode
  • 4758 Index chuck adjust mode
  • 4760 Moving to home position
  • 4761 Override condition
  • 4762 Side cover open
  • 4763 Home position return interlock
  • 4764 Spindle orientation interlock
  • 4765 Setup not complete
  • 4766 Setup complete interlock
  • 4767 ACC safety door locking switch NG
  • 4768 Please open ACC safety door
  • 4769 ACC system mode
  • 4770 Mode switch NG
  • 4771 Magnet chuck unclamp cycle
  • 4772 Tool select switch mismatch
  • 4773 ATC shutter barrier area
  • 4774 Invalid zero offset no.
  • 4775 Please open spindle cover
  • 4776 Canceling interference detection
  • 4777 Mist collector power OFF
  • 4778 Side cover open
  • 4779 ATC shutter interlock cancel mode
  • 4780 Maintenance door open
  • 4781 Ladder gate open.
  • 4782 Workpiece stocker error
  • 4783 Workpiece stocker overload
  • 4784 Mist collector error
  • 4785 Self check counter full count
  • 4786 Coolant controller error
  • 4787 Manual tool change enabled
  • 4788 Chip conveyer stop
  • 4789 Sensor overstroke
  • 4790 Chucking miss air route clogged
  • 4791 Linear guide cover interference
  • 4792 Workpiece washer overload
  • 4793 Coolant filter
  • 4794 Sequencer alarm
  • 4795 Please open ceiling door
  • 4796 APC safety interlock
  • 4797 Please open APC door
  • 4798 APC door lock incomplete
  • 4800 Tow-along steady rest connection
  • 4801 Oil mist error
  • 4802 Turret rotation interlock
  • 4803 Cross rail positioning auto set mode
  • 4804 Workpiece washing gun error
  • 4805 Coolant unit error
  • 4806 Lube oil drain tank overflow
  • 4807 Axis lube level low
  • 4808 Coolant level low
  • 4809 ATC step time over
  • 4810 System check
  • 4811 Coolant tank upper level
  • 4812 Chip crusher error
  • 4813 Waiting for workpiece check
  • 4814 Chuck open/close interlock
  • 4815 Attachment turret rotating
  • 4816 Long boring bar interlock
  • 4817 Safety door open interlock
  • 4818 Attachment manual change mode
  • 4819 ATC door not at end of stroke
  • 4820 M-Spindle rotation limit
  • 4821 Steady rest interlock
  • 4822 Feed axis condition
  • 4823 Turret indexing at reduced speed
  • 4824 Setup mode
  • 4825 Axis position encoder control error
  • 4826 General overload detection disabled
  • 4827 Canceling chuck grasp interlockl
  • 4828 Please switch door interlock ON
  • 4829 NC tailstock thrust change interlock
  • 4830 Tool indexing not complete
  • 4831 Door interlock
  • 4844 Coupling device interlock
  • 4845 Coolant level warning
  • 4846 Unloader setting position parameter
  • 4847 Interference area intrusion
  • 4848 No lower table present signal
  • 4849 Coolant level
  • 4850 Safety fence interlock
  • 4851 Door interlock
  • 4852 Canceling stroke end limit
  • 4853 Robot/loader power sequence error
  • 4854 Loader interference
  • 4855 Front door open interlock
  • 4856 Please open safety fence
  • 4857 Please close safety fence
  • 4858 Feed rate limit
  • 4859 Teaching panel enabling switch error
  • 4860 Multiple safety guards open
  • 4861 Equip. safety fence parameter mismatch
  • 4862 Dual cycle start button interlock
  • 4863 Tool change count-up
  • 4864 Other door open
  • 4865 Performing turnover cycle
  • 4866 No workpiece
  • 4867 M-spindle angle uncertain
  • 4868 Cycle start interlock
  • 4869 Chuck was changed
  • 4870 Invalid servo data selection
  • 4871 Inside barrier
  • 4872 Tailstock fretting
  • 4873 Door open/close limit switch NG
  • 4874 XB cover interference
  • 4875 Please push the NC start button
  • 4876 Please discharge coolant
  • 4877 Invalid positioning point
  • 4878 Pulse handle mode
  • 4879 Curvic cover not attached
  • 4880 Measurement unit error
  • 4881 NG chute workpiece present
  • 4882 Quality check counter notice count
  • 4883 Tow-along tailstock unclamp
  • 4884 Tool counter full count
  • 4885 Quality check counter full count
  • 4886 Tool counter warning
  • 4887 Tailstock/Chuck Pedal Enable
  • 4888 Mode switch operation error
  • 4889 PLC link error
  • 4890 Dust collector in local mode
  • 4891 Chip conveyor in local mode
  • 4892 Chip conveyor error
  • 4893 OP panel not at retract position
  • 4894 Multi-counter tool life warning
  • 4895 Hydraulic fluid level low
  • 4896 Lubricant level
  • 4897 Gauging data ready time out
  • 4898 Power save ON
  • 4899 Lower turret origin return interlock
  • 4900 Motor not ready to start
  • 4903 Reboot enabled parameter set
  • 4904 Barrier intrusion
  • 4905 Safety speed clamping
  • 4907 Alarm-A at other system

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Call Now Button
Contact Me on Zalo